| INA PART NO. | VLI200944-N |
| MAS PART NO. | M VLI200944-N |
| SERIES | VL |
| GEAR | Internal gear |
| TYPE | Ball |
| System of Measurement | Metric |
| Internal Diameter（mm) | 840 |
| Outside Diameter(mm) | 1048 |
| Internal Diameter On Outer Ring Di(mm) | 945.5 |
| External Diameter On Inner Ring do(mm) | 942.5 |
| Height of Overall Bearing Assembly H(mm) | 56 |
| Weight(kg) | 67.5 |
| Bolt Circle In Out Ring Lo(mm) | 1020 |
| NO.Holes In Out Ring no | 16 |
| Bolt Circle In Inner Ring Li(mm) | 905 |
| NO.Holes In Inner Ring ni | 22 |
| NO. of Gear Teeth(z2) | 107 |
| b(mm) | 856 |
| dazt(mm) | 941 |
| D azt(mm) | 1046 |
| Maximum Allowable Radial Load | 90900 N |
| Maximum Allowable Bending Fatigue Strength of Gear Teeths | 31400 N |
| Maximum Allowable Contact Fatigue Strength Of Gear teeth | 31400 N |
| Basic Dynamic Load Rating Axial (Ca) | 189000 N |
| Basic Static Load Rating Axial (C0a) | 670000 N |
| Basic Dynamic Load Rating Radial(Cr) | 171000 N |
| Basic Dynamic Load Rating Radial(COr) | 250000 N |
| Maximum Radial Bearing Clearance | 0.5 |
| Maximum Axial Tilting Bearing Clearance | 0.7 |
| Taper Type Lubrication Nipples | 4 |
| Bearings Are Also Available Without Holes In The Bearing Rings | Yes |
| Tooth modules | 8 |
Home Slewing Bearing Application About Us Resources News Contact Us