| INA PART NO. | VLI201094-N |
| MAS PART NO. | M VLI201094-N |
| SERIES | VL |
| GEAR | Internal gear |
| TYPE | Ball |
| System of Measurement | Metric |
| Internal Diameter（mm) | 984 |
| Outside Diameter(mm) | 1198 |
| Internal Diameter On Outer Ring Di(mm) | 1095.5 |
| External Diameter On Inner Ring do(mm) | 1092.5 |
| Height of Overall Bearing Assembly H(mm) | 56 |
| Weight(kg) | 81.5 |
| Bolt Circle In Out Ring Lo(mm) | 1170 |
| NO.Holes In Out Ring no | 16 |
| Bolt Circle In Inner Ring Li(mm) | 1055 |
| NO.Holes In Inner Ring ni | 24 |
| NO. of Gear Teeth(z2) | 125 |
| b(mm) | 1000 |
| dazt(mm) | 1091 |
| D azt(mm) | 1196 |
| Maximum Allowable Radial Load | 99100 N |
| Maximum Allowable Bending Fatigue Strength of Gear Teeths | 31400 N |
| Maximum Allowable Contact Fatigue Strength Of Gear teeth | 46700 N |
| Basic Dynamic Load Rating Axial (Ca) | 200000 N |
| Basic Static Load Rating Axial (C0a) | 780000 N |
| Basic Dynamic Load Rating Radial(Cr) | 181000 N |
| Basic Dynamic Load Rating Radial(COr) | 290000 N |
| Maximum Radial Bearing Clearance | 0.5 |
| Maximum Axial Tilting Bearing Clearance | 0.7 |
| Taper Type Lubrication Nipples | 4 |
| Bearings Are Also Available Without Holes In The Bearing Rings | Yes |
| Tooth modules | 8 |
Home Slewing Bearing Application About Us Resources News Contact Us